SKA-Mid will join 133 new dishes to the 64 of MeerKAT across 150 kilometers of the Karoo
SKA-Mid is the dish interferometer of the Square Kilometre Array, observing from 350 MHz to 15.4 GHz, with a goal of reaching 24 GHz later. It will have 197 dishes over about 150 km of the Northern Cape: 133 new SKA dishes of 15 m and the 64 dishes of MeerKAT. Its receivers are cooled to about minus 418 F (minus 250 C), and its timing aligns every dish to a billionth of a second.
MeerKAT, inaugurated in July 2018, has 64 dishes of about 13.5 m on baselines up to 8 km and processes its data in real time at up to 275 Gb/s. Its first receivers covered 900 to 1,670 MHz, and an S-band system (1.75 to 3.5 GHz) now runs as shared-risk science. MeerKAT+ adds 14 antennas of the SKA design, for about 50% more sensitivity; the first was handed over on 21 February 2024, funded by SARAO, the Max Planck Society (from 2019) and INAF of Italy (from 2020).
The SKA Observatory (SKAO) builds and will run SKA-Mid; the South African Radio Astronomy Observatory (SARAO) built and operates MeerKAT and is the host-country partner. France became the 14th SKAO member in June 2026. The design funding commitment is EUR 2 billion at 2021 conditions, inflated each year, and by December 2023 about R1.2 billion had been awarded to South African firms and institutions. The sister telescope, SKA-Low, is being built in Western Australia.
The dishes stand in Meerkat National Park in the Karoo, about an hour's drive from Carnarvon. See the SKA-Mid listing, the MeerKAT listing, radio telescopes around the world, the largest radio telescopes and more observatories in South Africa.
Advertisement
China's CETC54 builds the 15-meter SKA-Mid dishes, each more than 50 metric tons
Each SKA-Mid dish has a 15 m main reflector of 66 panels, weighs more than 50 metric tons and stands more than six stories tall. The optics are offset Gregorian, with a 4.5 m subreflector of metallized composite held on an arm clear of the main beam; Compoxi of Spain makes the subreflector structures and Eosol Group does their final integration. CETC54 led the 10-country design consortium and makes the dishes; other SKA-Mid parts come from Italy, Spain, Sweden, the UK and South Africa. The first production dish was assembled at Shijiazhuang, China, in December 2023, and the first dish was lifted into place in the Karoo on 4 July 2024.
Pointing failed to meet the specification under wind load, which forced a redesign of the elevation cradle, the pedestal and the foundation. SKAO named dish manufacture, radio frequency interference (RFI) and visas as causes of schedule slip in March 2025.
MeerKAT's 64 dishes came from a South African-led consortium
Vertex Antennentechnik designed the MeerKAT antennas and their servo systems. Stratosat Datacom was the local prime contractor, with General Dynamics Satcom in the consortium; Efficient Engineering made the pedestals and yokes, and Titanus Slew Rings supplied the slew rings. For the MeerKAT+ antennas, the Max Planck Institute for Radio Astronomy (MPIfR) says OHB Digital Connect developed them, while the 2024 handover release names OHB only as an industry partner.
| Component | Supplier | Country | Role | Status | Note |
|---|---|---|---|---|---|
| SKA-Mid 15 m dish structures, 133 new dishes | CETC54 | China | Manufacturer | In production | Assembled near Shijiazhuang for factory tests, then shipped at about two per month; 15th dish lifted on site July 2026 |
| SKA-Mid dish design consortium lead | CETC54 | China | Designer | Delivered | Led 10-country consortium |
| MeerKAT antenna and servo design | Vertex Antennentechnik | Germany | Designer | In service | General Dynamics company |
| MeerKAT 64 antennas, local prime contractor | Stratosat Datacom | South Africa | Integrator | In service | Leads consortium |
| MeerKAT antenna consortium member | General Dynamics Satcom | US | Manufacturer | In service | Part not specified by source |
| MeerKAT antenna positioners (pedestal and yoke) | Efficient Engineering | South Africa | Manufacturer | In service | 64 units, final delivery Dec 2016 |
| MeerKAT slew rings | Titanus Slew Rings (TSR) | Not stated by source | Manufacturer | In service | - |
| MeerKAT+ antennas, SKA dish design | OHB Digital Connect | Germany | Designer | Delivered | 14 antennas; first handed over 21 Feb 2024 |
| SKA-MPI prototype dish | CETC54 | China | Manufacturer | In service | With OHB Digital Connect (formerly MT Mechatronics) |
| SKA-MPI prototype dish | OHB Digital Connect (formerly MT Mechatronics) | Germany | Manufacturer | In service | First light reported Jan 2024 |
| SKA-Mid 4.5 m composite subreflector structures | Compoxi | Spain | Manufacturer | In production | Leads structural fabrication |
| SKA-Mid subreflector final integration | Eosol Group | Spain | Integrator | In production | Partly NextGenerationEU funded |
Receivers built in Sweden, South Africa and Germany cover SKA-Mid's bands from 350 MHz to 15.4 GHz
AAC Omnisys of Sweden builds the Band 1 receivers (350 to 1,050 MHz) under a EUR 12 million contract for 80 systems by the first quarter of 2027, from a prototype by Onsala Space Observatory. A pre-production Band 1 receiver was installed on a dish in May 2026, and delivery of the first pre-production feed system to South Africa was reported in August 2026. Qamcom builds the digitizers.
EMSS Antennas of South Africa builds 60 Band 2 receivers (950 to 1,760 MHz), cooled by helium, with coolers developed with Oxford Cryosystems. Their low-noise amplifiers (LNAs) are a National Research Council of Canada (NRC) design made by NANOWAVE Technologies. OHB Digital Connect will build 86 Band 5 receivers (4.6 to 15.4 GHz) under a EUR 10.7 million contract signed on 29 October 2025.
For MeerKAT, EMSS Antennas of Stellenbosch says it conceived, developed and built the 140 cryogenic UHF and L-band receivers with their helium and vacuum support; no SARAO source confirms this. MPIfR supplied the S-band receivers.
| Component | Supplier | Country | Role | Status | Note |
|---|---|---|---|---|---|
| Band 1 feed and receiver, 350 to 1050 MHz, 80 systems | AAC Omnisys (AAC Clyde Space) | Sweden | Manufacturer | In production | EUR 12 million; first pre-production unit delivered 2026 |
| Band 1 feed prototype | Onsala Space Observatory | Sweden | Designer | Delivered | - |
| Band 2 feed, 950 to 1760 MHz, 60 units | EMSS Antennas | South Africa | Manufacturer | In production | Stellenbosch; facility doubled |
| Band 2 cryogenic low-noise amplifiers | NANOWAVE Technologies | Canada | Manufacturer | In production | - |
| Band 2 low-noise amplifier design | National Research Council of Canada (NRC) | Canada | Designer | Delivered | - |
| Band 5 receivers, 4.6 to 15.4 GHz, 86 units | OHB Digital Connect | Germany | Manufacturer | Contracted | EUR 10.7 million, signed 29 Oct 2025 |
| Band 5 delivery support | Max Planck Institute for Radio Astronomy (MPIfR) | Germany | Designer | Contracted | With German Centre for Astrophysics (DZA) |
| MeerKAT UHF and L-band cryogenic receivers, 140 units with helium and vacuum support | EMSS Antennas | South Africa | Manufacturer | In service | Conceived, developed and built per company statement; no SARAO primary found |
| MeerKAT S-band receivers, 1.75 to 3.5 GHz | Max Planck Institute for Radio Astronomy (MPIfR) | Germany | Designer | In service | With SARAO; shared-risk science |
| Band 2 cryogenic coolers for Karoo conditions | Oxford Cryosystems | UK | Designer | In production | Source says collaborated with EMSS; supply role not stated |
Each SKA-Mid dish sends 100 gigabits a second down the fiber to a correlator in Cape Town
Each dish has a 100 Gb/s link to the correlator, and the route from the Karoo to Cape Town is rated at 20 Tb/s. A single fiber pair runs 737 km from the Karoo to Cape Town: Liquid Telecom dark fiber from Beaufort West to Cape Town, and since July 2025 a new link from Beaufort West to Carnarvon, 22 km overhead and 78 km buried. Gijima, with Nokia equipment, holds the long-haul transmission contract.
The NRC leads the Mid.CBF correlator and beamformer, with MDA Space as co-developer. For the early arrays, a TALON demonstration correlator of four TALON units in 8U handles up to eight antennas and 800 MHz of bandwidth. From the second array assembly, the production correlator runs on commercial servers, FPGA PCIe cards and 400 GbE switches in Cape Town, taking up to 200 inputs, 16 sub-arrays and 5 GHz of bandwidth.
Hydrogen masers and stabilized fiber keep 197 dishes in step
A reference signal of about 8 GHz travels over actively stabilized fiber to each of the 197 antennas, on links up to 175 km, locked to an ensemble of hydrogen masers. GMV of Spain builds the Timescales, three hydrogen masers each, for both SKA sites under a contract from February 2024 to October 2027. Safran built the first SKAO maser in South Africa, installed at a SARAO facility beside two MeerKAT masers on a vibration isolation platform from HWL Scientific Instruments, with a target of running by the end of 2026. Safran, formerly Seven Solutions of Granada, also supplies more than 200 White Rabbit WR-Z devices that distribute the pulse-per-second timing signal.
| Component | Supplier | Country | Role | Status | Note |
|---|---|---|---|---|---|
| Dish digitizer subsystem | Qamcom | Sweden | Manufacturer | In production | Chalmers spinoff; contract value not stated |
| Digitizer production test lab | Ranatec | Sweden | Manufacturer | In production | Qamcom sister company |
| Mid.CBF correlator and beamformer, TALON hardware | National Research Council of Canada (NRC) | Canada | Designer | In production | TALON demo correlator for early arrays; COTS FPGA cards from AA2; FPGA vendor not named |
| Mid correlator and beamformer co-development | MDA Space | Canada | Designer | In production | - |
| Long-haul transmission network Karoo to Cape Town | Gijima | South Africa | Integrator | Contracted | - |
| Long-haul transmission equipment | Nokia | Finland | Manufacturer | Contracted | Awarded with Gijima |
| Dark fiber Beaufort West to Cape Town | Liquid Telecom | South Africa | Operator | In service | - |
| Timescales, three hydrogen masers each, both SKA sites | GMV | Spain | Integrator | Contracted | Feb 2024 to Oct 2027; first South Africa maser built by Safran, per SKAO July 2026 |
| SKA-Mid hydrogen maser, first unit in South Africa | Safran | Not stated by source | Manufacturer | Delivered | Installed at SARAO facility beside two MeerKAT masers; target running by end 2026 |
| Maser vibration isolation platform | HWL Scientific Instruments | Not stated by source | Manufacturer | Delivered | For the SKA-Mid maser |
| White Rabbit WR-Z timing devices, over 200 units | Safran (formerly Seven Solutions) | Spain | Manufacturer | In production | Granada; split between Mid and Low not stated |
| Synchronization and timing system development | University of Granada | Spain | Designer | Delivered | With Seven Solutions |
| SKA-Mid fiber phase synchronization system design | ICRAR / University of Western Australia | Australia | Designer | Delivered | 2018 design paper; production supplier not named |
Two 135-petaflop processors will archive more than 700 petabytes a year from the SKA telescopes
The SKA telescopes send an average of 8 Tb/s to their central signal processors. Two science data processors (SDPs) of 135 PFLOPS each, in Cape Town and Perth, will archive more than 700 PB a year. Bull, named Eviden when it won the contract signed in Paris on 14 November 2025, supplies the SDP hardware for both telescopes, built in France; the first units support early science up to the second array assembly.
Science users will reach the data through the SKA Regional Centre Network (SRCNet). Its 0.1 test release in 2025 linked eight sites plus SKAO, with 7.8 PB of storage and 0.5 PFLOPS, and each regional center gets 20 Gb/s data flows. For MeerKAT, the Inter-University Institute for Data Intensive Astronomy (IDIA), run by the University of Cape Town, the University of the Western Cape and the University of Pretoria, operates the ilifu research cloud, the main platform for five of the eight MeerKAT large surveys; ilifu can embed machine learning in pipelines. No production AI or machine learning in the SKA-Mid pipeline is confirmed in the sources found.
| Component | Supplier | Country | Role | Status | Note |
|---|---|---|---|---|---|
| Science data processor hardware, both telescopes | Bull (Atos Group; named Eviden at 2025 award) | France | Manufacturer | Contracted | Signed 14 Nov 2025; SKAO calls the vendor Bull in July 2026; built in France |
| ilifu research cloud for MeerKAT survey processing | Inter-University Institute for Data Intensive Astronomy (IDIA) | South Africa | Operator | In service | Primary platform for five of eight large surveys |
| SKA-Mid software development | SARAO | South Africa | Designer | Contracted | - |
| Dish verification tool from MeerKAT | SARAO | South Africa | Designer | In service | Compares one verified dish with up to eight new ones |
| Software and signal-processing hardware (part not specified by source) | ASTRON | Netherlands | Designer | Contracted | Named in contract list only |
| Software and signal-processing hardware (part not specified by source) | CGI | Canada | Designer | Contracted | Named in contract list only |
| Software and signal-processing hardware (part not specified by source) | Avnet Silica | Germany | Manufacturer | Contracted | Named in contract list only |
| Software and signal-processing hardware (part not specified by source) | Sanitas EG | Not stated by source | Designer | Contracted | Named in contract list only |
SKA-Mid made its first fringes in December 2025 and is adding about two dishes a month
Two dishes produced first fringes in December 2025, announced on 7 January 2026, and a third gave phase closure. SKAO counted seven dish structures assembled on site in January 2026, with 12 more on the way from CETC54; by March, 19 dishes were on site in various stages and nine were assembled, against a target of 30 dishes a year. In July 2026 the 15th dish was lifted into place; four dishes had been confirmed working together in May, whole-structure testing began in mid-June, and the first test images were expected later in 2026. CETC54 ships about two dishes a month, and more than 40 dishes are expected on site or in transit by the end of 2026, with eight in the array, eight in system testing and 16 in final assembly.
The latest SKAO array schedule found dates from March 2025: array assembly 0.5 (AA0.5) ending in July 2026, AA1 in February 2027, AA*, the full baseline array, in November 2028, and the end of construction in March 2029. No AA0.5 or AA1 milestone has been announced since June 2026, and early operations of the whole array are expected by July 2028.
Roads, power and fiber for all 133 dishes are nearly finished
The Power Adenco Joint Venture holds the R889 million contract for roads, power and fiber, with about R100 million going to local small businesses; Zutari provides professional services, and WBHO built the Engineering Operations Centre near Carnarvon as a SARAO host-country deliverable. The infrastructure was first due in mid-2025 and then mid-2026; in July 2026 SKAO said most of it was nearing completion, with storm flood damage under repair.
| Component | Supplier | Country | Role | Status | Note |
|---|---|---|---|---|---|
| Civil infrastructure: roads, power rollout and fiber networks | Power Adenco Joint Venture | South Africa | Integrator | Contracted | R889 million; about R100 million to local SMMEs; due mid-2026, nearing completion July 2026 per SKAO |
| SKA-Mid infrastructure professional services | Zutari | South Africa | Designer | Contracted | - |
| Engineering Operations Centre near Carnarvon | WBHO | South Africa | Integrator | Contracted | SARAO host-country deliverable |
The SKA-Mid site opens to the public only on a few SARAO open days a year
There is no access to the site in Meerkat National Park without an appointment. SARAO holds a small number of open days each year; register interest through SARAO.
In Carnarvon, six local astro guides trained by SARAO run stargazing and cultural astronomy tours, booked through their Facebook page. No source confirms a visitor center for the telescope in Carnarvon.
Sources
- SKAO: first SKA-Mid dish installed
- SKAO: Contact magazine 19
- SKAO: Contact magazine 20
- SKAO: SKA-Mid milestone
- Engineering News: MeerKAT inaugurated
- SARAO: MeerKAT S-band receivers
- Max Planck Society: the MeerKAT extension
- MPIfR: Band 5 receivers for SKA-Mid
- GroundUp: astrotourism comes to the Karoo
- SA3CC: SKA networking (R. Hughes-Jones, 2025)
- Engineering News: the SKA project in 2026
- Engineering News: SKAO contracts in South Africa
- SKAO: first production dish assembled in China
- CompositesWorld: SKA subreflectors
- SKAO: the SKA telescopes
- arXiv: SKA-Mid frequency distribution
- SKAO: SKA-Mid commissioning update, March 2025
- SKAO: Swedish technology
- Space in Africa: first Band 1 pre-production feed delivered
- SKAO: South African technology
- SKAO: Canadian technology
- URSI: the SKA-Mid correlator and beamformer
- Space Daily: GMV timekeeping systems for the SKA
- Safran: White Rabbit nodes for the SKA
- Engineering News: a local manufacturer on MeerKAT
- Engineering News: EMSS Antennas
- IDIA: about IDIA
- SKAO: arrange a visit
- Astrotourism: the Carnarvon astro guides
- SKAO: high-precision technology finds applications
- idw: the SKA-MPI prototype dish